|
|
| 產品展示 |
|
Shell Gadus S5 U100KD/Shell Darina XL 102 Moly詳細說明 （瀏覽1475次）
Shell Gadus S5 U100KD
Advanced Multipurpose Grease with Solids
Shell Gadus S5 U100KD is an all season full synthetic grease. The superior high temperature capability of Shell
Gadus S5 U100KD grease ensures dependable lubrication in a wide range of operating temperatures from a
maximum of about 170 °C down to -45 °C.
APPLICATIONS
Shell Gadus S5 U100KD grease has been designed for optimum year round protection. Its synthetic formulation
ensures performance in extreme temperatures in severe applications where No Compromise is acceptable
PERFORMANCE BENEFITS
Shell Gadus S5 U100KD grease provides the following additional benefits and features:
? Superior High Temperature Performance and Oxidation Resistance - extremely stable at high temperatures.
It won't melt like conventional soap based greases and also exhibits superior resistance to oxidation ... this
helps ensure long grease and equipment life.
? Excellent Load Carrying Ability - formulated with non-leaded extreme pressure additives and moly
disulphide to provide excellent load carrying properties – which minimize your equipment wear.
? Excellent Low Temperature Performance – outstanding low temperature mobility and dispensability –
reducing inventory changes while ensuring year round protection.
? Outstanding resistance to water washout. It leaves a tenacious film which can often result in extended
lubrication intervals and reduced operating costs.
Previous Name: Previous Name: Shell Darina XL 102 Moly
? Extreme Low Temperature
? Centralized Systems
? Clay Technical Data Sheet
Shell Lubricants Page 2 of 2
17/01/2012
Typical Physical Characteristics
Shell Gadus ASTM Method S5 U100KD
NLGI Grade 1
Color Grey
Appearance Smooth
Dropping Point °C D2265 >280
Thickener Type Clay (1)
Worked Penetration
60 strokes @ 25°C
D217 320 - 340
Estimated Operating Range °C -45 to 170
Minimum (2) Dispensing Temperature, °C -40
Mobility
@ -35 °C, g/min
@ -40 °C, g/min
USS DM 43
3.8
2.0
Low Temperature Torque, N.m. D4693 1.3
Base Oil Viscosity, cST @ 40°C D445 100
Oil Separation, % mass @ 25°C, 24h D1742 2.0
Oil Separation , % mass @ 40°C, 18h IP121 1.8
EP Tests
4 ball, Weld Load, kg
4 ball, Load Wear Index
4 ball, Wear Scar, mm
D2596
D2596
D2266
315
70
0.6
Timken OK Load, kg D2509 20.4
Water Wash Out, % Loss @ 79°C D1264 2.9
Corrosion Tests
48 hour @ 52°C
Fafnir Fretting, mg
D1743
D4170
Pass
1.2
(1) previously referred to as “Microgel”
(2) vary with design of grease gun or centralized system
These physical characteristics are typical of current product |
|
|
