|
|
| 產品展示 |
|
Shell Gadus S3 High Speed/Shell Albida Grease GC 1詳細說明 （瀏覽1587次）
Shell Gadus S3 High Speed
Coupling Grease
Premium Gear Coupling Grease
Shell Gadus S3 High Speed Coupling Grease a special grease for flexible gear
couplings. It is based on high viscosity mineral Oil and a lithium complex soap
thickener.
Applications
Shell Gadus S3 High Speed Coupling Grease is
used for the grease lubrication of flexible gear
couplings operating at a speed ?300 rpm.
Performance Features
? Resists separation
Standard greases tends to separate oil and
thickener under the influence of centrifugal
forces.
? Mechanical unstable
Soften when worked, flows easily in
couplings.
Re-greasing Intervals
For couplings operating near their maximum
recommended temperatures, re-greasing intervals
should be reviewed
Advice
Advice on applications not covered in this leaflet
may be obtained from your Shell Representative.
Typical Physical Characteristics
NLGI Consistency 1
Colour Dark brown
Soap Type Lithium
complex
Base Oil (type) Mineral
Kinematic Viscosity
@ 40°C cSt
100°C cSt
(IP 71/ASTM-D445)
700
34
Cone Penetration
Worked @ 25°C 0.1mm
(IP 50/ASTM-D217)
310-340
Dropping Point
°C
(IP 132)
?150°C
These physical characteristics are typical of
current production. Whilst future production will
conform to Shell’s specification, variations in
these characteristics may occur
Health & Safety
Shell Gadus S3 High Speed Coupling Grease is
unlikely to present any significant health or safety
hazard when properly used in the recommended
application, and good standards of industrial and
personal hygiene are maintained.
For further guidance on Product Health & Safety
refer to the appropriate Shell Product Safety Data
Sheet
For more information please contact your Shell Marine Products Representative or refer to the Port Services Guide on our
website: shell.com/marine. Shell is not liable for application/advice errors when Product Data Sheets/Material Safety Data
Sheets are obtained from non-official sources/sites other than the official website as shown above.
P |
|
|
