|
|
| 產品展示 |
|
Shell Tegula V 32/Shell Tegula V32詳細說明 （瀏覽1607次）
Shell Tegula V 32
Advanced technology oil for hydrodynamic transmissions
Tegula V 32 is an advanced technology oil designed to meet the latest requirements
of variators and advanced railway transmission systems combining hydrodynamic
couplings and torque converters with mechanical gears.
Applications
? Railway hydrodynamic transmission systems
Transmission systems for railway diesel engines
consist of various combinations of fluid couplings,
torque converters and transmission gears. This
type of transmission is used in combination with a
hydrodynamic brake which is operated to reduce
brake shoe wear during periods of prolonged
braking down long slopes. At times, the brake oil
temperature may reach up to 140°C.
? Gears and PIV variator lubrication
Performance Features and Benefits
? Based on a blend of highly refined mineral oils
and optimized additive system for superior
thermal and oxidative stability
? Meets increased thermal requirements of
railway hydrodynamic transmissions for
extended drain intervals.
? Provides excellent and constant air release
properties over long period
? Excellent extreme-pressure and micro-pitting
resistance properties permit excellent load-
carrying capacity with reduced component
wear
? Compatibility with all seal materials and paints
normally specified for use with mineral oil
? Enhanced compatibility with yellow metals
even at higher temperatures
? Not recommended for use in industrial
couplings if excessive water entrainment
can not be avoided
Specification and Approvals
Voith 3.285-149 (for use in Voith Power
Transmissions).
Tegula V 32 is approved and recommended by
Voith Turbo, PIV and Lenze.
Advice
Advice on applications not covered in this leaflet
may be obtained from your Shell representative.
Health and Safety
Guidance on Health and Safety are available on
the appropriate Material Safety Data Sheet which
can be obtained from your Shell representative.
Protect the environment
Take used oil to an authorized collection point. Do
not discharge into drains, soil or water.
Typical Physical Characteristics
Tegula V 32
Kinematic Viscosity ISO 3104
at 40°C mm2
/s 32
at 100°C mm2
/s 5.6
Viscosity Index ISO 2909 110
Density at 15°C kg/m3 ISO 12185 870
Flash Point COC °C ISO 2592 211
Pour Point °C ISO 3016 -30
FZG-Test A/8.3/90 DIN 51354-2
Failure load stage >12
These characteristics are typical of current production. Whilst future production will conform
to Shell's specification, variations in these characteristics may occur. |
|
|
