中国一级特黄aa毛片大片|日本成人一区二区|俺去啦俺来也|欧美亚洲电影|国产男人女人做性全过程视频

旺鴻達潤滑油
深圳市旺鴻達潤滑油貿易有限公司
電話：0755-29675629
傳真：0755-81472607
手機：13662610386
聯系人：歐陽民
網址：www.jingjiang8.com
郵箱：shell2123@126.com
地址：深圳市寶安區龍華街道龍觀東路金龍華廣場二期金龍閣1307室
郵編：518000
美孚潤滑油
殼牌潤滑油
阿吉普潤滑油
克魯勃潤滑油
埃爾夫潤滑油
福斯潤滑油
道達爾潤滑油
嘉實多潤滑油
倍可潤滑油
加德士潤滑
BP潤滑油
太陽潤滑油
Q8潤滑油
長城潤滑油
昆侖潤滑油
好富頓潤滑油
產品分類
 
產品展示
FUCHS RENOLIN ZAF D液壓油詳細說明　（瀏覽1630次）

RENOLIN ZAF D


 Print
Zinc and Ash-Free, Detergent Hydraulic Oils

Diagram 

Zinc and Ash-Free, Detergent Hydraulic Oils

Zinc- and ash-free hydraulic oils have steadily gained popularity over the last few years. In many cases the use of a zinc-free hydraulic oil is a must, especially in machine tools where hydraulic oils can contaminate other functional fluids.
RENOLIN ZAF D hydraulic oils are zinc- and ash-free hydraulic oils with good detergent properties. The detergent agents in these oils reduce the formation of residues and ageing by-products.
They are HM hydraulic oils in line with ISO 6743-4 but with additional detergent and dispersant characteristics.

The most important features of RENOLIN ZAF D hydraulic oils are: 

  • Good oxidation stability and good resistance to ageing 
  • Powerful EP properties and very good wear protection 
  • Excellent corrosion protection 
  • Rapid air release and low foaming 
  • Good sludge transportation and cleaning properties 
  • Good compatibility with sealing materials
Application:

RENOLIN ZAF D products are high-grade HM hydraulic oils in line with ISO 6743-4 which can be used in all hydraulic systems but also as CKC lubricating oils in line with ISO 6743-6. RENOLIN ZAF D products contain additives which avoid the formation of residues and guarantee the functional reliability of machinery.

OLIN ZAF    32 D  46 D  68 D  
Hydraulic oil type            
acc. to ISO 6743-4   HM 32 HM 46 HM 68  
acc. to DIN 51 502   HLPD 32 HLPD 46 HLPD 68  
Lubricating oil type          
acc. to ISO 6743-6   CKC 32 CKC 46 CKC 68  
acc. to DIN 51 502   CLP 32 CLP 46 CLP 68  
Characteristics Unit       Test method
Colour   1 1 1 ASTM D 1500
Kinematic viscosity          
at 40 °C mm2/s 32 46 68 ASTM D 445
at 100 °C mm2/s 5.4 6.9 8.6 ASTM D 445
Viscosity index   100 105 97 ASTM D 2270
Density at 15 °C kg/l 0.878 0.882 0.884 ASTM D 1298
Flash point, Cleveland open cup °C 210 230 230 ASTM D 92
Pour point °C -33 -27 -24 ASTM D 97
Neutralization number mg KOH/g 0.35 0.35 0.35 ASTM D 974
Saponification number mg KOH/g 1.1 1.1 1.1 ASTM D 94
Air release at 50 °C min 3 4 7 ASTM D 3427
Foaming,          
seq. I ml 30/0 50/0 50/0 ASTM D 892 seq. I-III
seq. II ml 20/0 20/0 20/0 ASTM D 892 seq. I-III
seq. III ml 20/0 20/0 20/0 ASTM D 892 seq. I-III
Copper corrosion degree of corr. 1a-100A3 1a-100A3 1a-100A3 ASTM D 130
Rust prevention   pass A pass A pass A ASTM D 665
Ageing behaviour, increase in neutralization number after 1000 h mg KOH/g < 2 < 2 < 2 ASTM D 943
Brugger boundary friction test N/mm2 38 38 38 DIN 51 347 (D)
FZG mechanical gear rig test load stage > 12 > 12 > 12 DIN 51 354-2
Vickers vane pump test, loss of mass          
on ring mg <120 <120 <120 IP 281
on vanes after 250 h mg <30 <30 <30 IP 281
Effect on SRE-NBR 1 seal material acc. to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours,          
relative volume change % 7 6 5 DIN 53 521 together with DIN 53 505
change in Shore A hardness Shore -3 -3 -2 DIN 53 521 together with DIN 53 505


 Disclaimer of Liability

上一產品： CASTROL Hyspin ZH-M
下一產品： Total HYDRANSAFE HFC146/HFDU 46道達爾抗燃液壓油
Copyright (C) 2010　深圳市旺鴻達潤滑油貿易有限公司　www.jingjiang8.com　All Right Reserved
地址：深圳市寶安區龍華街道龍觀東路金龍華廣場二期金龍閣1307室　電話：0755-29675629　傳真：0755-81472607　聯系人：歐陽民
網址：www.jingjiang8.com　E-mail：shell2123@126.com　友情鏈接：旺鴻達潤滑油　粵ICP備16127079號