|
|
| 產品展示 |
|
RENOLIN CLP 68詳細說明?。g覽1916次）
齒輪油
產品名稱性能概述及應用
RENOLIN UNISYN CLP 系列全合成聚烯烴基極壓齒輪油。與礦物油完全相容，滿足并超過DIN HC及ISO CKC等級，并取得FLENDER認可。
建議用于承受高壓和工作溫度波動大的軸承及齒輪箱潤滑系統中。
RENOLIN CLP 系列高極壓工業齒輪油。具有極強的極壓抗磨和防腐蝕性能。符合美鋼USS 224、美國齒輪制造商協會AGMA250.44及德國DIN 51517-3的規格。
特別適用于負荷處于波動的情況和齒面磨合期。
RENOLIN MR 系列齒輪箱磨合防銹油，具有極佳的抗極壓，防腐防銹性能，可作為齒輪箱及機組的磨合油及防銹油。
RENOLIN MR 10 Z被ZF公司推薦用于動力轉向試驗臺測試用油。
Product
I N F O R M A T I O N
RENOLIN UNISYN CLP
Also named RENOLIN UNISYN CKC
Fully Synthetic Polyalphaolefin-Based Industrial Gear and Lubricating Oils
Designed for use in industrial gearboxes and general Application:
lubricating systems subject to high temperatures, RENOLIN
UNISYN CLP oils are fully-synthetic lubricants based on RENOLIN UNISYN CLP oils can be used in bearings, lubrication
polyalphaolefins. RENOLIN UNISYN CLP oils lower friction and systems and gearboxes subject to high or fluctuating
reduce wear. Furthermore, these oils increase the efficiency of temperatures.
machine components.
In gearboxes and lubricating systems where the sump
Depending on the application, a number of viscosity grades temperatures exceed 90 °C, normal mineral oil change
can be satisfied by a single RENOLIN UNISYN CLP oil. This intervals can be significantly extended with RENOLIN UNISYN
allows users to rationalize stocks and cut costs. CLP oils which, in turn, substantially lower operating and
disposal costs.
Polyalphaolefins, and thus RENOLIN UNISYN CLP oils, are
miscible and compatible with mineral oils at all ratios and can When changing-over to RENOLIN UNISYN CLP oils in machines
be disposed-of as such. The compatibility of polyalphaolefins and equipment that operate at temperatures of over 60 °C,
with common machinery materials, seals and paint finishes is one viscosity grade lower than the normal mineral oil grade
comparable with that of mineral oils. Changing-over to should be selected.
RENOLIN UNISYN CLP is therefore very simple and requires no
prior flushing. The reduction of the oil sump temperature increases lubricity,
viscosity and lifetime of the lubricant and the gear units.
RENOLIN UNISYN CLP oils can be classified as CKC lubricating
oils according to ISO 6743-6. RENOLIN UNISYN CLP oils can Specifications:
also be classified as CLP lubricating oils according to DIN 51
517-3.
The advantages of RENOLIN UNISYN CLP oils: * DIN 51 517-3: CLP-HC
* Good low-temperature characteristics * ISO 6743-6: CKC
* Good high-temperature characteristics * US Steel 224
* Excellent resistance to ageing and oxidation (increases * AGMA 250.04
service intervals)
* FZG A/8,3/90: load stage > 12, DIN 51 354-2
* Excellent corrosion protection (steel and nonferrous
* FZG A/16,6/140: load stage > 12, DIN 51 354-2
materials)
* FZG C/8,3/90: load stage 10, FVA1) No. 54/I-IV
* Excellent viscosity-temperature behaviour because of
their high natural viscosity index (VI) * Approved by FLENDER, Germany
* Excellent anti-wear properties (FZG failure load stage > * Approved by other important gear manufacturers
12, FZG A/8,3/90 and FZG A/16,6/140)
* High micro pitting resistance according to FVA1) 54/I-IV
(FZG load stage 10 = high, GT C/8,3/90)
* Absolutely shear-stable
* Rapid air release
* Excellent foaming properties, no foam
* Good demulsifying properties, very good water
separation
* Operating temperatures can be reduced, increase of
lubricant life time
1) FVA = German Drivetrain Research Association
|
|
|
